Description:________________________________________
NOTE: Be sure that you have all of the parts before you start to assemble.
Push Broom & Squeegee
Assembly Instructions
PUSH BROOM WITH UNBREAKABLE CONNECTOR – ASSEMBLY
Part #s 1425P1, 1426P1, 1434P1, 1435P1
• Align the Holes in Unbreakable Connector which is attached
to the Handle (B) to the holes in the Broom Head (A).
• Securely tighten the Socket Head Cap Screws (C) into the
Broom Head (A) with the included Allen Wrench.
Part Description QTY.
A Broom Head 1
B Handle 1
C Button Socket Head Cap Screw 1/4-20x1-1/2" 2
REQUIRED TOOLS
Allen Wrench Included
The AMES Companies, Inc.
Email: help@ames.com | Customer Service: 800-393-1846 | www.harperbrush.com
PART #12599
Printed in the USA
Rev. D
To Previous Page
Loading...
