Harper 2224P1 User Manual

Description:________________________________________
NOTE: Be sure that you have all of the parts before you start to assemble.
Push Broom & Squeegee
Assembly Instructions
PUSH BROOM WITH BRACE – ASSEMBLY
Part #s 2224P1, 3424P1, 6724P1, 7324P1, 7924P1
• Align the Broom Handle (B) connector with the grooves
in the Broom Head (A)
• Securely tighten the Broom Handle to the Broom Block
using Bolt (C) and the ½" Socket or Wrench.
• Loosely assemble Left Broom Brace (F) and Right Broom
Brace (G) using Bolts (E). Do not tighten all the way.
• Slide the Brace down the handle to the Broom Head and attach
using Screws (D) and the 7/16" Socket or Wrench and tighten.
• Finish tightening Bolts (E)
SQUEEGEE-ASSEMBLY
Part # 5324224P1
• Place the Handle (B) in the center section of the Squeegee Head (A).
• Attach the Handle using 2 Bolts (F).
• Loosely assemble Left Squeegee Brace (D) and Right Squeegee
Brace (E) using Bolts (C). Do not tighten all the way.
• Slide the Squeegee Brace down the Handle and place the Brace
in the angled slots. Attach the Brace to the Squeegee Head
using 2 Bolts (F). Do not over-tighten.
• Finish tightening Bolts (C).
Part Description QTY.
A Broom Head 1
B Broom Handle 1
C Bolt, 5/16" - 18x1-1/4" 1
D Screw, 1/4" - 10x7/8" 2
E Carriage Bolt, 1/4" - 20x1" 2
F Left Broom Brace 1
G Right Broom Brace 1
Part Description QTY.
A Squeegee Head 1
B Squeegee Handle 1
C Bolt, 1/4" - 20x1" 2
D Left Squeegee Brace 1
E Right Squeegee Brace 1
F Bolt, 1/4" - 10x1.25" 4
REQUIRED TOOLS
1/2" SOCKET or WRENCH
7/16" SOCKET or WRENCH
REQUIRED TOOLS
7/16" SOCKET or WRENCH
Attach Handle
Attach Handle
Loosely Assemble
Broom Brace
Squeegee Brace
Attach Broom Brace
Attach Brace
Assembled Broom
Assembled Squeegee
The AMES Companies, Inc.
Email: help@ames.com | Customer Service: 800-393-1846 | www.harperbrush.com
PART #12599
Printed in the USA
Rev. D

Harper 2224P1 Specifications

General

Brand	Harper
Model	2224P1
Category	Farm Equipment
Language	English

Summary

Push Broom with Brace Assembly

Handle Attachment and Securing

Align and securely tighten the broom handle to the broom head using the provided bolt.

Brace Assembly and Attachment

Loosely assemble and attach the broom braces to the handle and broom head, then finish tightening.

Squeegee Assembly

Handle Insertion and Securing

Place the squeegee handle in the head and attach using bolts.

Brace Assembly and Attachment

Loosely assemble squeegee braces, attach them to the head, and finish tightening.

Push Broom with Unbreakable Connector Assembly

Aligning Connector and Securing Screws

Align holes in the connector attached to the handle with the broom head and tighten screws.