Harris DAC-5016 - Page 16

4 5000/5100 Series Digital Analog Clocks Installation and Operation Manual
Chapter 1: DAC-5000 Series Digital Analog Clocks
Table 1-1 provides information about clock wall mounting
specifications
Note
A convenient template drawing showing the correct mounting centers
is included with the clock.
Clearances
Table 1-2 lists the minimum clearances, measured in inches, from the
mounting keyhole centers to the outside edge of each clock:
Table 1-1. Clock Wall Mounting Specifications
Clock
Overall
Dimensions
Mounting Keyhole
Centers
DAC-5016 17.45×17.45 in. 16.0×15.5 in.
(4 keyholes)
DAC-5012 13.95×13.95 in. 12.0×10.5 in.
(4 keyholes)
DAC-5008 10.45×10.45 in. 8.0×8.0 in.
(3 keyholes). The bottom
single keyhole is located
Table 1-2. Clock Clearances
Clock Clearances (Inches)
DAC-5016
• Top edge 0.8
• Sides 0.725
• Bottom edge 1.275
DAC-5012
• Top edge 1.12
• Sides 0.975
• Bottom edge 2.35
DAC-5008
• Top edge 0.825
• Sides 1.275
• Bottom edge 1.85