DESCRIPTION OF CORDS
(continued)
PLUG
AND RESISTOR CORD (SPR)
This cord is fitted with a type 346A
male plug and switchable
1500
fi
resistor and is approximately four
inches long. When switched in, the
resistor is inserted in series with the
ring side of the cord to simulate a
long loop condition.
-
GROUND START CORD
(3W)
This cord consists of one red, one
black, and one green fabric covered
tinsel conductor ap~roximatelv five
feet long, each fitted'with an a~l/~ator
clip of the type used on the standard
cord. Pressina the GROUND START
button connects the green (ground)
conductor to the red (ring) conductor
inside the Test Set.
TCI Library: www.telephonecollectors.info
To Next Page
Loading...
Need help?
General
