To Next PageTo Next Page
Need help?Do you have a question about the Harris FlexStar HDE-200 and is the answer not in the manual?
General| Brand | Harris |
|---|---|
| Model | FlexStar HDE-200 |
| Category | Recording Equipment |
| Language | English |
Read and heed all safety and operating instructions before using the product.
Details the key features and front panel controls of the HDE-200.
Describes the general process of installing the HDE-200, focusing on rear panel connections.
Explains the importance of the GPS connection for time accuracy and HD Radio synchronization.
Details AES/EBU digital input/output pinouts and connections for Main Delay In and MPS Audio In.
Describes the 44.1 kHz sample rate, synchronization, and sample rate conversion.
Provides step-by-step instructions for installing the ECC application on a computer.
Details methods for configuring HDE-200 network settings using the ECC app or a USB flash drive.
Discusses editing operational settings like Diversity Delay, Profanity Delay, and GPS options via the ECC app.
Details how to adjust the Diversity Delay time to align analog and HD Radio signals, including visual alignment tips.
Allows editing HDE-200 network settings, device name, and site location.
Guides the user through the process of updating the HDE-200's embedded software and firmware.
Describes the front panel controls for monitoring audio inputs/outputs and signal levels.
Explains how to use the Monitor Select button to cycle through input and output sources.
Explains the Fault LED behavior and how to display alarm conditions on the front panel.
Guides users on how to monitor and control HDE-200 Exporters using the ECC application.
Describes how to view audio levels for analog and HD Radio signals using the ECC app's meters.
Details how to control the Diversity Delay, including status bar, ramp controls, and progress indicators.
Explains how to control the optional Profanity Delay, including status bar and dump button functionality.
Provides guidance on troubleshooting common issues with the HDE-200, including reset procedures.
Troubleshoots why HDE-200 devices may not appear in the ECC application's device list.
Guides on how to configure Windows Firewall to allow ECC app communications with HDE-200.
Explains how to update the HDE-200's embedded software and firmware.
Provides a step-by-step procedure for updating the HDE-200's code using a USB flash drive.
Details how to uninstall and reinstall the ECC application for updates.
Explains the process of replacing CPU or DSP assemblies and the required pairing procedure.
Guides on configuring Windows Firewall exceptions for the ECC app in Windows 7.
