EasyManua.ls Logo

Harris ProVac Plus - Maintenance

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10411 80th Avenue Pleasant Prairie, WI 53158 | Customer Care: 1-866-616-1270|Fax: 1-866-616-1271|HarrisPoolProducts.com
VI.
MAINTENANCE
The cleaner requires almost no maintenance. Visually
inspect your cleaner from time to time to make sure
that:
1. Theapperismovingfreelyandisnotobstructed
by debris.
2. The foot pad is not excessively worn. When the
traction pads on the bottom have worn down, it is
time for replacement.
When storing the cleaner, do not coil the hose. Lay
thehoseatINanareaprotectedfromdirectsunlight.
If hose sections are disconnected, try not to disturb the
hose weight locations.
The cleaner’s hose is specially designed to ensure
optimum performance for the cleaner.
Disclaimer of Liability about your pool and the
cleaner
There are a multitude of factors that contribute to the
life of your pool. The automatic pool cleaner is a very
passive product that will have no impact on pool life.
Please be aware that over time, deterioration,
discolorationandbrittlenessofanypoolnishcanbe
caused separately by, or in combination with, age, an
imbalance in pool water chemistry, improper installation
and other factors. An automatic pool cleaner, such as
the cleaner, will not remove or cause wear on “good”
pool plaster. In fact, the opposite is true-pool plaster
will eventually cause wear on the cleaner.
The same situation holds true for vinyl-lined in ground
swimming pools, because vinyl liners are also affected
by the environment and factors such as pool water
chemistry, sunlight and the pool’s surroundings.
Therefore over time, vinyl can become brittle and
weak. In addition, vinyl-lined pools are affected by the
workmanship, composition and installation of the liner
and the workmanship and quality of construction of the
supporting walls and pool base. These are all factors
which can contribute to liner failure. The existence
of any of these type of conditions in your pool is not
caused by the use or operation of the cleaner. The
manufacturer disclaims any liability for repairs or
replacement to any of these structures or components
of the customer’s pool.
The pool owner must assume all responsibility for the
condition and maintenance of the pool’s surface, water
and deck.