HART BPH003 20V - User Manual

1 - English
Always remove battery pack from your tool when you
are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal
injury.
Always remove battery pack before storing the device.
When battery becomes fully charged, unplug the
charger from the power supply and remove the battery
pack from the charger.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes and other possible
serious injuries.
Keep battery pack dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean battery pack.
Do not use a battery pack that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
Do not modify or attempt to repair a battery pack that
has been damaged.
Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature
range specified in the instructions. Charging improperly
or at temperatures outside of the specified range may
damage the battery and increase the risk of fire.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also.
OPERATION
LITHIUM-ION BATTERY PACKS
Lithium-ion batteries deliver fade free power for their entire
run time. Lithium-ion tools will not gradually lose power
due to decreasing battery charge. Instead, power from the
battery pack will drop from full to zero once the full charge
has been drained from the battery. Once this happens,
recharging of the battery is required. It is not necessary to
drain the battery pack completely before recharging.
BATTERY PROTECTION FEATURES
Lithium-ion battery packs are designed with features that
protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and
resume operation. If the tool still does not work, the battery
needs to be recharged.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures
down to 14°F. Put the battery pack on a tool and use the
SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure
to follow all instructions listed below, may result in electric
shock, fire and/or serious personal injury.
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards when not
using your battery tool or when changing accessories.
Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.
Do not place battery tools or their batteries near fire
or heat. This will reduce the risk of explosion and possibly
injury.
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
Charge only with HART
™
20V battery chargers. Use
of other chargers may result in personal injury, fire,
or damage.
Do not charge in an area of extreme heat or cold. It
will work best at normal room temperature. To reduce
the risk of serious personal injury, do not store outside or
in vehicles.
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water.
If liquid gets into your eyes, flush them with clean water
for at least 10 minutes, then seek immediate medical
attention. Following this rule will reduce the risk of serious
personal injury.
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause sparks, burns, or a
fire.
To register your HART
™
product, please visit:
https://HARTtools.com/register
Use this battery pack for HART
™
20V cordless products
only. Refer to the Operator’s Manual provided with product.
Always mention the model number above when communi-
cating with us regarding this battery pack.
BPH003 20V
4.0Ah Li-ion Battery Pack

Summary

Safety Rules

General Battery Safety

Instructions on handling battery tools, avoiding heat, crush hazards, ignition sources, and short circuits.

Battery Charging and Maintenance

Guidelines for charging with correct chargers, temperature limits, cleaning, and avoiding damaged batteries.

Operation

Lithium-Ion Battery Characteristics

Describes fade-free power delivery and power drop from full to zero for lithium-ion batteries.

Battery Protection Features

Explains built-in features that protect cells and maximize battery life, including tool stoppage reset.

Cold Weather Operation

Details on using the battery pack in temperatures down to 14°F and warming up for operation.

Battery Fuel Gauge

Charge Level Indicator

Explains how to display the amount of charge left in the battery using LED indicators.

Battery Charging Procedures

Initial and General Charging

Advice on charging battery packs shipped in low charge condition and using recommended chargers.

Charging Hot Battery Packs

Information on charging when the battery pack becomes hot after use.

Charging Cold Battery Packs

Information on charging when the battery pack is cold.

Battery Maintenance and Storage

Long-Term Storage

Instructions for storing battery packs for longer than 30 days, including temperature and charge level.

Battery Recycling and Disposal

Proper Disposal Methods

Guidance on recycling lithium-ion batteries to preserve natural resources.

Corrosive or Conductive Fluid Exposure

Immediate Actions and Disposal

Steps to take if a battery pack is exposed to corrosive/conductive fluids, including containment and contact.

Service and Support

Product Registration and Warranty

Information on registering products, warranty details, and proof of purchase requirements.

Contacting Customer Support

Details for obtaining replacement parts, customer support, and technical assistance.

HART BPH003 20V Specifications

General

Brand	HART
Model	BPH003 20V
Category	Battery Pack
Language	English