EasyManuals Logo

HART HGCS02 20V User Manual

HART HGCS02 20V
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14 – English
WARNING:
Do not allow familiarity with this product to
makeyoucareless.Rememberthatacareless
fractionofasecondissufficienttoinflictseri-
ous injury.
WARNING:
Alwaysweareyeprotectionwithsideshields
markedtocomplywithANSIZ87.1,alongwith
hearingandheadprotection.Failuretodoso
couldresultinobjectsbeingthrownintoyour
eyesresultinginpossibleseriousinjury.
WARNING:
Do not use any attachments or accessories
notrecommendedbythemanufacturerofthis
product. The use of attachments or acces-
soriesnotrecommendedcanresultinserious
personalinjury.
WARNING:
Neverfellatreeorcutalogorlimbthathasa
diametergreaterthanthelengthoftheguide
bar.Onlyproperlytrainedprofessionalsshould
performthesecuts.Performingthesetypesof
cutscancauseanaccidentandresultindeath
orseriouspersonalinjury.
NOTICE:
Before each use, inspect the entire product
fordamaged,missing,orloosepartssuchas
screws,nuts,bolts,caps,etc.Tightensecurely
allfastenersandcapsanddonotoperatethis
productuntilallmissingordamagedpartsare
replaced.Pleasecontactcustomerserviceor
anauthorizedservicecenterforassistance.
APPLICATIONS
Youmayusethisproductforthefollowingpur-
poses:
Basiclimbing,felling,andwoodcutting
OPERATION
TO INSTALL/REMOVE BATTERY PACK
See Figure 5.
WARNING:
Always remove battery pack from your tool
whenyouareassemblingparts,makingadjust-
ments,cleaning,carrying,transportingorwhen
notinuse.Removingbatterypackwillprevent
accidental starting that could cause serious
personalinjury.
NOTE: Toavoid serious personal injury, always
removethebatterypackandkeephandsclearof
thelook-outbuttonwhencarryingortransporting
thetool.
To install:
Placethebatterypackinyourchainsaw.Align
raisedribonbatterypackwithgrooveinchain
saw’sbatteryport.
WARNING:
Makesurethelatchonthebatterypacksnaps
in place and the battery pack is fully seated
andsecureinthebatteryportbeforebeginning
operation.Failuretosecurelyseatthebattery
packcouldcausethebatterypacktofallout,
resultinginseriouspersonalinjury.
BATTERY
PACK
BATTERY
PORT
FIG. 5
LATCH

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HART HGCS02 20V and is the answer not in the manual?

HART HGCS02 20V Specifications

General IconGeneral
BrandHART
ModelHGCS02 20V
CategoryChainsaw
LanguageEnglish

Related product manuals