EasyManuals Logo

HART HGCS02 20V User Manual

HART HGCS02 20V
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4 – English
CHAIN SAW SAFETY WARNINGS
Keep all parts of the body away from the
saw chain when the chain saw is operating.
Before you start the chain saw, make sure
the saw chain is not contacting anything.A
momentof inattention while operating chain
sawsmaycauseentanglementofyourclothing
orbodywiththesawchain.
Always hold the chain saw with your right
hand on the rear handle and your left hand on
the front handle. Holdingthechainsawwitha
reversedhandconfigurationincreasestherisk
ofpersonalinjuryandshouldneverbedone.
Hold the power tool by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring.Sawchainscontacting
a“live”wiremaymakeexposedmetalpartsof
thepowertool“live”andcouldgivetheoperator
anelectricshock.
Wear safety glasses and hearing protec-
tion. Further protective equipment for head,
hands, legs and feet is recommended.
Adequate protectiveclothing will reduceper-
sonalinjurybyflyingdebrisoraccidentalcontact
withthesawchain.
Do not operate a chain saw in a tree. Opera-
tionofachainsawwhileupinatreemayresult
inpersonalinjury.
Always keep proper footing and operate
the chain saw only when standing on fixed,
secure and level surface.Slipperyorunstable
surfacessuchasladdersmaycausealossof
balanceorcontrolofthechainsaw.
When cutting a limb that is under tension be
alert for spring back.Whenthetensioninthe
woodfibresisreleasedthespringloadedlimb
maystriketheoperatorand/orthrowthechain
saw out of control.
Use extreme caution when cutting brush and
saplings.
Theslendermaterialmaycatchthe
sawchainandbewhippedtowardyouorpull
you off balance.
Carry the chain saw by the front handle with
the chain saw switched off and away from
your body. When transporting or storing the
chain saw always fit the guide bar cover.
Properhandlingofthechainsawwillreducethe
likelihoodofaccidentalcontactwiththemoving
sawchain.
Follow instructions for lubricating, chain ten-
sioning and changing accessories. Improperly
tensionedorlubricatedchainmayeitherbreak
orincreasethechanceforkickback.
Do not operate a chain saw, on a ladder, from
a rooftop, or any unstable support. Operation
of a chain saw in this manner could result in
serious personal injury.
Do not operate a chain saw in a tree unless
you have been specifically trained to do so.
Operation of a chain saw in a tree without
proper training could increase the risk of
serious personal injury.
Cut wood only. Do not use chain saw for
purposes not intended. For example: do not
use chain saw for cutting plastic, masonry
or non-wood building materials.Useofthe
chainsawforoperationsdifferentthanintended
couldresultinahazardoussituation.
Do not attempt to fell a tree until you have an
understanding of the risks and how to avoid
them. Seriousinjurycouldoccurtotheoperator
orbystanderswhilefellingatree.
Follow all instructions when clearing jammed
material, storing or servicing the chain saw.
Make sure the switch is off and the battery
pack is removed. Unexpectedactuationofthe
chain sawwhile clearing jammed material or
servicingmayresultinseriouspersonalinjury.
CAUSES AND OPERATOR PREVENTION OF
KICKBACK
Kickbackmayoccurwhenthenoseortipofthe
guidebartouchesanobject,orwhenthewood
closesinandpinchesthesawchaininthecut.
Tipcontactinsomecasesmaycauseasudden
reversereaction,kickingtheguidebarupandback
towardstheoperator.
Pinchingthesawchainalongthetopoftheguide
barmaypushtheguidebarrapidlybacktowards
theoperator.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HART HGCS02 20V and is the answer not in the manual?

HART HGCS02 20V Specifications

General IconGeneral
BrandHART
ModelHGCS02 20V
CategoryChainsaw
LanguageEnglish

Related product manuals