6 – English
FEATURES
PRODUCT SPECIFICATIONS
Motor ..................................................................... 40VDC
BladeLength ..............................................................24 in.
KNOW YOUR HEDGE TRIMMER
See Figure 1.
Thesafeuseofthisproductrequiresanunderstandingof
theinformationonthetoolandinthisoperator’smanual
aswellasaknowledgeoftheprojectyouareattempting.
Beforeuseofthisproduct,familiarizeyourselfwithalloper-
ating features and safety rules.
GUARD
Theguardhelpstodeflectchipsorotherdebrisawayfrom
theoperator’shands.
ROTATING REAR HANDLE
Therearhandlecanberotatedtolockateithersidein45°
or90°anglesforeaseofusewhentrimming.Thisisuseful
whentrimmingverticallyoralongthesidesofshrubbery.
SCABBARD
Thescabbardkeepstheoperatorfromcomingincontact
withthesharpbladeswhenthetoolisnotinuse.Italso
helpskeepthebladesfrombeingnickedordamagedwhen
thetoolisinstorage.
UNPACKING
Thisproducthasbeenshippedcompletelyassembled.
Carefullyremovetheproductandanyaccessoriesfrom
thebox.MakesurethatallitemslistedinthePacking
List are included.
WARNING:
Donotusethisproductifitisnotcompletelyassem-
bledorifanypartsappeartobemissingordamaged.
Useofaproductthatisnotproperlyandcompletely
assembledcouldresultinseriouspersonalinjury.
Inspecttheproductcarefullytomakesurenobreakage
ordamageoccurredduringshipping.
Donotdiscardthepackingmaterialuntilyouhavecare-
fullyinspectedandsatisfactorilyoperatedtheproduct.
Ifanypartsaredamagedor missing, please call
1-800-776-5191forassistance.
PACKING LIST
Hedge Trimmer
Scabbard
Operator’sManual
ASSEMBLY
WARNING:
Ifanypartsaredamagedormissingdonotoperatethis
productuntilthepartsarereplaced.Useofthisproduct
withdamagedormissingpartscouldresultinserious
personalinjury.
WARNING:
Donotattempttomodifythisproductorcreateacces-
soriesnotrecommendedforusewiththisproduct.Any
suchalterationormodificationismisuseandcouldresult
in a hazardous condition leading to possible serious
personalinjury.
WARNING:
Topreventaccidentalstartingthatcouldcauseserious
personalinjury,alwaysremovethebatterypackfromthe
productwhenassemblingparts.
CuttingCapacity...........................................................1in.
CuttingSpeed ............................................3,200cuts/min.