Need help?Do you have a question about the Hartke HS 1200 KickBack and is the answer not in the manual?
Output and Input Levels| rated output power | 135 W |
|---|---|
| rated input level | -30.1 dBu |
| total harmonic distortion | 0.03% |
Signal Quality| signal to noise ratio | 85 dB |
|---|---|
| frequency response pre output | 5 Hz - 60 kHz |
| frequency response speaker output | 35 Hz - 52 kHz |
Gain and Equalization| maximum gain input to pre output | 45.05 dB |
|---|---|
| maximum gain input to speaker output | 62.1 dB |
| equalizer low | ±15 dB |
Additional Specifications| shape effect | 22 - 23 dB |
|---|---|
| noise level volume level min. | -60 dBu |
| headphone level | 493 mW |
Details the input jack for connecting the bass and the volume control for adjusting sound level.
Explains the Low, Mid, High EQ knobs and the Shape switch/control for tone shaping.
Covers the Direct Out, Headphone jack, Power switch, and Power LED.
Details the fuse holder for protection and the speaker output for connecting speakers.
Instructions for removing packing materials, choosing placement, and ensuring ventilation.
Guides on connecting speaker, AC power, instrument, and initial power-on sequence.
Details setting volume, using the Shape switch and control for tone shaping.
Instructions for adjusting EQ controls and testing the headphone output for practice.
Guides on connecting the Direct Out to DI box or mixer for sound reinforcement or recording.
To Next Page
