Stay on: For the oven to be used in the " ". the food may catch fire if the cooking time is set too long. Close
supervision is necessary during toasting and the time should not be set too long.
NOTE: For cooking times which are under sixty minutes, first set to a longer time and then turn the switch back to
the time you require.
To set functions by turning the function knob to desired level.
The oven will automatically start cooking after function, time and temperature are set.
To set the time of cooking by turning the timer knob to desired time per your food cooking guide.
After the cooking time is up, the unit will " Dong" to stop.
To set the temperature by turning the temperature knob.
If the unit is not in use, always set the knobs to "I".
FITTING THE OVEN INTO THE KITCHEN UNIT
Fit the oven into the space provided
in the kitchen unit; it may be fitted
underneath a work top or into an
upright cupboard.Fix the oven in
position by screwing into place, using
the two fixing holes in the frame.
To locate the fixing holes,open
the oven door and look inside.
To allow adequate ventilation,the
measurements and distances
indicated in the diagram must be
adhered to when fixing
the oven.
IMPORTANT
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit that are next to the oven must be made
of a heat resistant material. Ensure that the gules of units that made of veneered wood can vithstand temperatures of at least 120
ºC
.
Plastics or glues that cannot withstand such temperatures will melt and deform the unit,once the oven has been lodged inside the units,
electrical parts must be completely insulated.This is a legal safety requirement.All guards must be firmly fixed into place so that it is impossible
to remove them without using special tools. Remove the back of the kitchen unit to ensure an adequate current of air circulates around the oven.
The hob must have a rear gap of at least 45 mm.
HOW TO USE
Appliances with stainless steel fronts
Always remove any flecks of lime scale,grease, corn flour and egg white immediately. Corrosion
can form under such flecks. Use stainless steel care products. Follow the manufacturer's
instructions. Try out the product on a small area first, before using on the whole surface.
Appliances with aluminum fronts
Use a mild windows-cleaning detergent.
Wipe the area with a soft windows cloth or a fluff- free micro-fibre cloth,using a horizontal action
without applying pressure.
Aggressive cleaning products, scratchy sponges and rough cleaning cloths are not suitable.
To Next Page
Loading...
General