5. After you have turned the table over to its upright position attach the puck catchers P5
using screws H4 as shown in FIGURE 3. Attach the electronic P6 to the middle of the main
frame using screws H5 as shown in FIGURE 3. After attaching the electronic feed the plugs
from under the table through the apron and into the back of the electronic as shown.
\\
\\
, P6
//
,, Electronic
/
\
\\ /
\\_ /
f)5 ,,
\
I
\
6. Peel the backing off the pad A2 and attach in to the striker A 1 as shown in FIGURE 4.
A2
c 2006 Escalade sports 6 For customer service call 1-866-556-2758
To Next Page
Loading...