Do you have a question about the Harvia FORTE and is the answer not in the manual?
Model | FORTE |
---|---|
Category | Heater |
Heater Type | Electric |
Heating Elements | 3 |
Protection Class | IP24 |
Voltage | 400 V |
Control Type | Digital |
Supply Voltage | 400 V |
Open heater lid, press HI-mode (A) and MENU (B), adjust temp with +/- (C).
Wait 5-15 minutes for the sauna room temperature to reach 50-60°C.
Throw a small amount of water (max. 2 dl) at a time on the stones.
If sauna room temperature rises too high, select LO-mode.
Select LO-mode (D), ensure stones are dry, and close the heater lid.