Need help?Do you have a question about the Harvia Digital KIP and is the answer not in the manual?
General| Heater Type | Electric Sauna Heater |
|---|---|
| Mounting | Wall-mounted |
| Stone Capacity (lbs) | 44 |
| Heating Element | Stainless Steel |
| Control Type | Digital |
| Power Options (kW) | 6.0, 8.0 |
| Voltage Options | 240V |
| Phase | 1 or 3 |
| Frequency | 60 Hz |
| Safety Features | Overheat Protection |
Describes expected sauna heating times and temperatures based on heater size and environment.
Outlines the warranty period for heating elements and other heater components.
Provides detailed electrical requirements, including breaker size, voltage, and wire type for 4.5kW/6.0kW and 8.0kW heaters.
Details mounting requirements for the power unit in dry or weatherproof locations, considering sensor reach.
Specifies indoor mounting for the touchpad and its connection to the power unit via a data cable.
Instructions for bringing power to the power unit and connecting hot lines and ground to the appropriate terminals.
Details how to relay power from the power unit to the heater's terminals and high-limit safety circuit.
Explains how the temperature sensor mounts in the sauna and connects to the power unit via a wire.
Guides on how to initiate heating immediately or set a delayed start time using the touchpad controls.
Instructions on adjusting the desired sauna temperature via the touchpad interface.
Covers auto-shutoff, troubleshooting high-limit safety circuits, and humidity preferences.
To Next Page
