Hasselblad 501CM - Troubleshooting

















Troubleshooting
PROBLEM
R
EMEDY














POSSIBLE CAUSE
You cannot operate the
exposure release button
There is no image on the
focusing screen
You cannot remove the front
protective cover
You cannot attach the lens
You cannot remove the lens
You cannot remove the
magazine
Your camera is built to give long and trouble-free service, especially when you follow the maintenance
and care advice at the end of this manual. If however you encounter any operating difficulties because
you are not familiar with the Hasselblad camera system, the following table may help to resolve them.
If the problem persists and the camera is still under guarantee, you should contact your Hasselblad
dealer. If the guarantee has expired, you should contact a Hasselblad Authorised Service Center for
advice. You can obtain the address of your nearest service centre from your dealer, distributor, our
23