DANGER
To reduce the risk of electric shock:
• Always unplug this furnishing from the electrical outlet before cleaning or servicing.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING ELECTRIC HEIGHT ADJUSTABLE BASE
SAVE THESE INSTRUCTIONS
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
• Unplug from outlet before putting on or taking off parts.
• Close supervision is necessary when this furnishing is used by, or near children,
invalids, or disabled persons.
• Use this furnishing only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer.
• Never operate this furnishing if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the
furnishing to a service center for examination and repair.
• Keep the cord away from heated surfaces.
• Never operate the furnishing with the air openings blocked. Keep the air openings
free of lint, hair, and the like.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
• To disconnect, turn all controls to the off position, then remove plug from outlet.
• WARNING - Risk of Electric Shock – Connect this furnishing to a properly grounded
outlet only. See Grounding Instructions.
• WARNING - Risk of Fire and Shock - Use only SJ, SJT, SJE, SJEO, S, SO, SOW, SOO,
SOOW, STO, STOW, STOO, STOOW, SEO or SEOW or equivalent type 16 AWG cord minimum.
• WARNING - Risk of Fire, Electric Shock, or Personal Injury – Read instructions
to determine the appropriate size, shape, and weight of work surface and/or
secondary surfaces (shelves) is used.
• WARNING - Risk of Electric Shock, Fire, and Injury - Review the assembly
instructions to confirm that the appropriate critical components and accessories
are being used with the furnishing.
• Maximum intended load is 250lbs (113kg), including the weight of the worksurface itself.
• This product is designed with Duty Cycle of 10% – 2 Minutes On / 18 Minutes Off.
GROUNDING INSTRUCTIONS
This product is for use on nominal 120-volt circuit and has a grounding plug that looks
like the plug illustrated in Figure A. Make sure that the product is connected to an outlet
having the same configuration as the plug. No adapter should be used with this product.
Figure A
Grounded Pin
Grounded
Outlet Box
Grounded
Outlet
Tab for
Grounding Screw
Adapter
Figure B
PAGE 2 OF 22
To Next Page
Loading...
