Hatz 2-4M41. - Page 64

SAMPLING OF EXHAUST EMISSIONS
After the engine is installed in the equipment and placed in service, the sampling of
exhaust emissions can be performed in a way that prevents diluting the exhaust sample
with ambient air as follows:
Specification: Adding a 20-centimeter bended extension to the exhaust pipe
Engine type Ø d (mm) HATZ-Ident. Nr.
Clamp
HATZ-Ident. Nr.
2L41 C 48 038 775 00 504 103 01
3L41 C 48 038 775 00 504 103 01
4L41 C
48 038 775 00 504 103 01
55 038 776 00 038 778 00
4L42 C
48 038 775 00 504 103 01
55 038 776 00 038 778 00
2M41 55 038 776 00 038 778 00
3M41 55 038 776 00 038 778 00
4M41 55 038 776 00 038 778 00
4M42 55 038 776 00 038 778 00
63