EPA CERTIFIED ENGINES 2L41C, 2M41, 2M41Z
108
HATZ
Operator’s Manual
Assembly:
▪ Assemble in reverse sequence.
▪ Make sure that all parts are correctly placed and tightened.
▪ Use anti-seize compound J as specified by HATZ.
SAMPLING OF EXHAUST EMISSIONS
After the engine is installed in the equipment and placed in service, the sam-
pling of exhaust emissions can be performed in a way that prevents diluting
the exhaust sample with ambient air as follows:
Specification: Adding a 20-centimeter bended extension to the exhaust pipe.
Engine type Ø d (mm) HATZ-Ident. Nr.
Clamp
HATZ-Ident. Nr.
2L41C 48 0000 038 775 00 0000 504 103 01
2M41 55 0000 038 776 00 0000 038 778 00
To Next Page
Loading...
