Warning labels and information signs on the machine
The warning labels and information signs on the machine must be followed
(see the chapter "Labels" 3.3 Labels, page 19).
The warning labels and information signs must be kept legible and must be
replaced if necessary. For this purpose, contact your nearest HATZ service
station.
Maintenance work
Maintenance work that goes beyond the scope described in this manual
must only be performed by qualified technicians (see the chapter 2 General
information, page 6).
Independent maintenance work and constructional changes to the machine,
especially to the safety equipment, are not permitted.
Safety equipment
Safety equipment must not be modified and must not be rendered ineffective
during normal operation.
General safety instructions
DANGER
Danger to life and danger of injury due to failure to follow
the warnings on the machine and in the Operator's Manual.
▪ Heed the warnings on the machine and in the Operator's
Manual.
WARNING
Danger of injury and danger of incorrect operation due to
inadequate personnel qualifications.
▪ The personnel must have read and understood this Opera-
tor's Manual or must possess the qualifications necessary
for working with this equipment, acquired in training/instruc-
tional courses.
▪ Only qualified personnel are permitted to operate and main-
tain this machine.
▪ Failure to comply will cause the warranty to become void.
4H50TIC Safety
HATZ
Operator's Manual 13
To Next Page
Loading...
