Trailer Dolly
600 lb. capacity
The Trailer Dolly is a very useful device for anyone who owns a small trailer. When used properly, the Trailer Dolly will
help you to safely move a lightweight trailer over short distances. It is also valuable for maneuvering lightweight trailers in
tight spaces.
The Trailer Dolly is easily assembled. Please review the parts listing and parts diagram below when putting the Trailer Dolly
together. Make sure all parts shown below are included in the packaging box. If any parts are missing or if you have any
questions about this product, please call Harbor Freight Tools at the telephone number shown on the next page.
Please keep this instruction sheet along with the warranty card and your receipt for future reference.
Item #37510
Parts List Hardware
Item #37510 Page 1
Part # Description Qty Part # Description Qty
A T-Bar Handle 1 1 M10 x 50 Bolt 3
B Axle Assembly 1 2 M10 Nut 5
C Handle Mount 1 3 Lock Washer 5
D Brace 1 4 M12 x 30 Bolt 1
E Coupler Ball 1 5 M12 Nut 1
F Stand 1 6 Lock Washer 1
G Wheel 2 7 M18 x 40 Bolt 1
H Washer 2 8 Lock Washer 1
I Cotter Pin 2 9 Washer 1
J Rubber Grip 2 10 M10 x 20 Bolt 2
Parts Diagram
Before using the Trailer Dolly, please read the warnings on the reverse side of this page.
REV 04l, 08g
To Next Page
Need help?
General
