Page 3For technical questions, please call 1-888-866-5797.Item 57720
SAFETYOPERATIONMAINTENANCE ASSEMBLY
b. Maintain the Carrier. Check for misalignment
or binding parts, breakage of parts and
any other condition that may affect
operation. If damaged, have the product
repaired before use. Many accidents are
caused by poorly maintained products.
4. Use the Carrier in accordance with these
instructions, taking into account the working
conditions and the work to be performed. Use of
this equipment for operations different from those
intended could result in a hazardous situation.
Motorcycle Carrier Safety Information
1. Secure motorcycle frame and wheels
securely using ratcheting tie downs
(not included) and included pins.
2. Push, do not drive, the motorcycle onto the Carrier.
3. Obey all DOT regulations pertaining to
mounting the Carrier onto a vehicle.
4. Only use this product with a vehicle that has
a 2″ square receiver hitch, rated to Class III or
Class IV, and can bear the additional weight
of both the Carrier and motorcycle.
5. Do not sit on motorcycle while loading,
unloading, or while supported on carrier.
6. Do not exceed maximum load for this product
(600 lb.). Loading a heavier object on this
product can result in dangerous conditions
to both the operator and the item loaded.
7. Do not exceed 55 mph while carrier
is attached to vehicle.
8. Turn off the vehicle’s ignition and set the parking
brake before installing, loading, or unloading Carrier.
9. Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. Keep bystanders out of the area during
assembly, loading and unloading.
11. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Specifications
Weight Capacity 600 lb
Motorcycle Platform Size 78-3/4″ X 8″
Receiver Size 2″
Platform Thickness 12 Gauge (0.109″)
To Next Page
Loading...