EasyManua.ls Logo

Haulotte Group H18SX - User Manual

Haulotte Group H18SX
87 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operator's manual
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL -
COMPACT 10/12 DX - COMPACT 2668/3368 RT
4000014860 E10.16 USA / GB
Operator's manual
ENGINE-POWERED SCISSOR LIFTS
H12SX (HS 3388RT) - H12SXL (HS 3388RTXL) -
H15SX (HS 4388RT) - H15SXL (HS 4388RTXL) -
H18SX (HS 5388RT) - H18SXL (HS 5388RTXL) -
COMPACT 10DX (COMPACT 2668RT)
COMPACT 12DX (COMPACT 3368RT)
4000003660
X
USA

Table of Contents

Other manuals for Haulotte Group H18SX

Questions and Answers

  • J
    Jeremy SpencerSep 23, 2025
    What to do if the load calculator does not work on Haulotte Group Boom Lifts?
    • M
      markwebsterSep 23, 2025
      If the load calculator of your Haulotte Group Boom Lifts does not work, it is likely due to a faulty load calculator. Repair or replace the calculator.
  • M
    Mark JonesAug 23, 2025
    What to do if there is no movement with the selector in driving position and platform control box joystick activated in Haulotte Group Scissor Lifts?
    • J
      Jacob WilliamsAug 25, 2025
      If your Haulotte Group Scissor Lifts experiences no movement when the selector is in driving position and the platform control box joystick is activated, the issue could stem from a faulty joystick, which would require replacement. Another potential cause is insufficient hydraulic oil, which can be resolved by topping up the oil level. Additionally, exceeding the authorized tilt or slope limits, or overloading the platform with too much weight (personnel or material) can cause this issue. In the latter case, reduce the load.
  • M
    Margaret JonesAug 25, 2025
    Why is the hydraulic circuit overheating in my Haulotte Group H18SX Scissor Lifts?
    • U
      uleonardAug 26, 2025
      If you experience hydraulic circuit overheating in your Haulotte Group Scissor Lifts, it might be because the oil viscosity level is too high. In this case, you should drain the circuit and refill it with the recommended oil. Another possible cause is not enough hydraulic oil, so ensure that you top up the oil level.
  • C
    cynthiaabbottAug 27, 2025
    What to do if there is no movement with the lifting selector and joystick activated in Haulotte Group Scissor Lifts?
    • S
      sullivanronaldAug 27, 2025
      If your Haulotte Group Scissor Lifts experiences no movement with the lifting selector and joystick activated, the selector or joystick may be faulty, or there may not be enough hydraulic oil. Check the movement with the lower lifting selector activated and the machine stabilized. If necessary, top up the oil level.
  • J
    Jessica DominguezAug 27, 2025
    Why is platform lifting and lowering jerky in Haulotte Group Scissor Lifts?
    • J
      Jessica KochAug 27, 2025
      If the platform lifting and lowering is jerky in your Haulotte Group Scissor Lifts, it is likely due to not enough hydraulic oil. To resolve this, top up the oil level.
  • C
    Cory CoffeySep 18, 2025
    Why does the steering system work irregularly in Haulotte Group Boom Lifts?
    • A
      Anthony WilliamsonSep 18, 2025
      If the steering system of your Haulotte Group Boom Lifts works irregularly, the hydraulic oil temperature may be too low. Perform movements without any load to heat up the oil.
  • N
    Nicole SpearsSep 15, 2025
    What to do if the platform will not lower on Haulotte Group Boom Lifts?
    • K
      Karen LawsonSep 15, 2025
      If the platform of your Haulotte Group Boom Lifts will not lower, it might be because the load in the platform is too heavy. Reduce the load to allow the platform to lower.
  • C
    Christopher ReevesSep 17, 2025
    Why does the machine race when lowering in Haulotte Group Boom Lifts?
    • T
      Tabitha NortonSep 17, 2025
      If the machine races when lowering in your Haulotte Group Boom Lifts, it is likely due to a poorly adjusted or faulty balancing valve. Contact HAULOTTE Services® to adjust or replace the balancing valve.
  • M
    Matthew BrownSep 6, 2025
    What to do if there is no movement with the lifting selector and joystick activated in Haulotte Group Boom Lifts?
    • A
      Austin WebbSep 6, 2025
      If you experience no movement with the lifting selector and joystick activated on your Haulotte Group Boom Lifts, it could be due to a faulty selector, a faulty joystick, or insufficient hydraulic oil. Check the movement with the lower lifting selector activated and the machine stabilized. For a faulty joystick, contact HAULOTTE Services® to replace it. Also, ensure that you top up the oil level.
  • B
    Brandy WallaceSep 4, 2025
    What to do if the load calculator does not work on Haulotte Group H18SX?
    • M
      millermarkSep 4, 2025
      If the load calculator does not work on your Haulotte Group Scissor Lifts, it is likely due to a faulty load calculator. Repair or replace the calculator to solve this issue.

Summary

Safety Precautions

Operation Instructions

Guidelines and prohibitions for operating the machine safely.

Potential Risks

Details specific risks encountered during operation like falling, electrocution, and overturning.

Operating Principle

Safety devices

Explanation of safety systems and their functions.

Load Limiting

System to prevent platform overload.

Driving

Checks before use

Daily and pre-work inspections required for safe operation.

Functional Tests

Testing safety features and controls.

Operation from Ground Position

Procedures for starting, shutting down, and controlling from ground.

Operations from Platform

Procedures for operating the machine from the platform.

Special Procedure

Emergency Lowering

Procedures for emergency lowering of the platform.

Technical Specifications

Haulotte Group H18SX Specifications

General IconGeneral
BrandHaulotte Group
ModelH18SX
CategoryScissor Lifts
LanguageEnglish

Related product manuals