What to do if the load calculator does not work on Haulotte Group Boom Lifts?
If the load calculator of your Haulotte Group Boom Lifts does not work, it is likely due to a faulty load calculator. Repair or replace the calculator.
What to do if there is no movement with the selector in driving position and platform control box joystick activated in Haulotte Group Scissor Lifts?
If your Haulotte Group Scissor Lifts experiences no movement when the selector is in driving position and the platform control box joystick is activated, the issue could stem from a faulty joystick, which would require replacement. Another potential cause is insufficient hydraulic oil, which can be resolved by topping up the oil level. Additionally, exceeding the authorized tilt or slope limits, or overloading the platform with too much weight (personnel or material) can cause this issue. In the latter case, reduce the load.
Why is the hydraulic circuit overheating in my Haulotte Group H12SX Scissor Lifts?
If you experience hydraulic circuit overheating in your Haulotte Group Scissor Lifts, it might be because the oil viscosity level is too high. In this case, you should drain the circuit and refill it with the recommended oil. Another possible cause is not enough hydraulic oil, so ensure that you top up the oil level.
What to do if there is no movement with the lifting selector and joystick activated in Haulotte Group Scissor Lifts?
If your Haulotte Group Scissor Lifts experiences no movement with the lifting selector and joystick activated, the selector or joystick may be faulty, or there may not be enough hydraulic oil. Check the movement with the lower lifting selector activated and the machine stabilized. If necessary, top up the oil level.
Why is platform lifting and lowering jerky in Haulotte Group H12SX Scissor Lifts?
If the platform lifting and lowering is jerky in your Haulotte Group Scissor Lifts, it is likely due to not enough hydraulic oil. To resolve this, top up the oil level.
Why does the steering system work irregularly in Haulotte Group Boom Lifts?
If the steering system of your Haulotte Group Boom Lifts works irregularly, the hydraulic oil temperature may be too low. Perform movements without any load to heat up the oil.
What to do if the platform will not lower on Haulotte Group Boom Lifts?
If the platform of your Haulotte Group Boom Lifts will not lower, it might be because the load in the platform is too heavy. Reduce the load to allow the platform to lower.
Why does the machine race when lowering in Haulotte Group Boom Lifts?
If the machine races when lowering in your Haulotte Group Boom Lifts, it is likely due to a poorly adjusted or faulty balancing valve. Contact HAULOTTE Services® to adjust or replace the balancing valve.
What to do if there is no movement with the lifting selector and joystick activated in Haulotte Group Boom Lifts?
If you experience no movement with the lifting selector and joystick activated on your Haulotte Group Boom Lifts, it could be due to a faulty selector, a faulty joystick, or insufficient hydraulic oil. Check the movement with the lower lifting selector activated and the machine stabilized. For a faulty joystick, contact HAULOTTE Services® to replace it. Also, ensure that you top up the oil level.
What to do if the load calculator does not work on Haulotte Group Scissor Lifts?
If the load calculator does not work on your Haulotte Group Scissor Lifts, it is likely due to a faulty load calculator. Repair or replace the calculator to solve this issue.
General recommendations for safe operation and understanding the manual.
Instructions and conditions to check before operating the machine.
Guidelines and prohibitions for safe machine operation.
Details the manufacturer's identification plate for machine recognition.
Lists and describes the primary components of the machine with a location diagram.
Details safety features such as guardrails, anchorage points, and maintenance support.
Explains decal classification plans, colors, and specific decals for models.
Describes ground and platform control boxes, including their components and indicators.
Ensures machine fitness for work and operator awareness of regulations.
Details pre-operation checks, including visual inspections and functional tests.
Describes test procedures and operation from ground and platform controls.
Provides general information on machine characteristics and compliance.
Presents overall dimensions of the machines with diagrams.
Shows working area and range of motion for specific machine models.
Details specific tests required by AS and CE standards.
Information regarding the intervention register.
Information about the operator's manual and its importance for safe operation.
Details the HAULOTTE Services® After Sales Service and contact information.
Information regarding HAULOTTE® compliance and warranty voidance due to modifications.
Provides contact information for HAULOTTE Services® globally.
Defines the owner's obligations regarding informing operators and maintaining manuals.
Outlines the employer's duty to issue driving permits and forbid unfit operators.
Specifies the trainer's qualification and training requirements for operators.
Details the operator's duties, including reading the manual and safe operation.
Table outlining responsibilities for inspections and maintenance.
Explains how hydraulic energy and battery power operate the machine.
Details safety devices like control activation, platform lifting, and drive speed limits.
Ensures machine fitness for work and operator awareness of regulations.
Details pre-operation visual inspections and functional tests.
Describes test procedures and operations from ground and platform controls.
Details principles and procedures for emergency lowering from the ground.
Explains principles and procedures for lowering the machine for repairs.
Provides procedures for disengaging drive hubs and releasing brakes for towing.
Details principles and procedures for safe loading, unloading, and lifting operations.
Explains the internal fault detection system and the procedure to follow.
Provides general information on machine characteristics and compliance.
Presents detailed technical specifications for various machine models.
Presents overall dimensions of the machines with diagrams.
Shows working area and range of motion for the Compact 12DX model.
Details specific tests required by AS and CE standards.
Explains the stability test procedure and provides stability data.
General| Brand | Haulotte Group |
|---|---|
| Model | H12SX |
| Category | Scissor Lifts |
| Language | English |
To Next Page
