Haulotte 4527A Quick-start Guide Page1
Hydraulic Articulating Boom Lift
1- Park lift on a reasonably flat surface with 14 feet of clearance left to right for outriggers. Outriggers can
level the unit on a grade of up to 12.5°
2- Set parking brake on lift and disconnect from vehicle, unhook all safety chains, cables, and electrical
connections.
3- Release the two green handled lever locks, which secure the boom for transport.
4- Make sure that BOTH red emergency stop buttons are PULLED OUT. There is one on each control panel.
The unit will not power on if one of these is pressed in.
5- At the ground control panel, turn key counter-clockwise for operation from the base.
6- Press and hold the EXTEND and AUTO LEVEL buttons
SIMULTANEOUSLY
until unit stops beeping and all
outrigger lights are green.
Please call us anytime at (928) 634-8531 with any questions or issues.
To Next Page
Need help?
General
