Haulotte SUMMIT Series

Other manuals for Haulotte SUMMIT Series

Parts And Service Manual117 pages

Instructions4 pages

Questions and Answers

C
Carolyn JonesAug 12, 2025
Why are there no lights on the Haulotte SUMMIT Boom Lifts panel?
- D
  dhartAug 12, 2025
  If there are no lights on the panel of your Haulotte Boom Lifts when the key switch is turned to the on position, several issues could be the cause. First, check if the Emergency STOP is engaged and disengage it. If that's not the issue, the battery charge might be low, so recharge as needed. Inspect the battery connections for loose ground or in-series cables and repair them. Also, ensure the battery main disconnect is plugged in. Finally, check for any blown fuses and replace them if necessary.
M
Mrs. Emily JimenezAug 23, 2025
How to fix Haulotte SUMMIT outrigger indicator LED lights?
- A
  ashleygomezAug 23, 2025
  If the outrigger indicator LED lights on your Haulotte Boom Lifts are not functioning, there are a few potential reasons. First, ensure the key switch is turned to the ground controls position. Also, check if the Emergency STOP is engaged and disengage the emergency STOP buttons. Finally, make sure all outriggers are deployed.
R
Robin MoranNov 2, 2025
What to do if Haulotte SUMMIT controls don't work?
- M
  Michelle ReedNov 2, 2025
  If one or more boom controls on your Haulotte Boom Lift are not functioning, functioning improperly, or functioning intermittently, there are several potential causes. First, ensure the key switch is in the correct position (ground or platform controls). Check if the battery charge is low and recharge it if needed. Disengage any engaged Emergency STOP buttons. Inspect and repair any loose battery ground or in-series cables. Make sure all outriggers are properly deployed and the lift is level. Inspect the hydraulic pump and repair or replace if necessary. Check wiring terminals in the control box and at the valve manifold for loose connectors, repairing or replacing as needed. Clean the valve solenoid and recheck its function; repair or replace if needed. Check the display for system status...