Need help?Do you have a question about the Haulotte H23TPX and is the answer not in the manual?
General| Drive Speed | 4.5 km/h |
|---|---|
| Max Slope | 5° |
| Platform Dimensions | 2.44 m x 0.91 m |
| Power Source | Diesel |
| Horizontal Outreach/Reach | 18.3 m |
| Overall Width | 2.50 m |
Explains symbols and colors used in the manual for safety information and warnings.
Covers essential safety precautions for machine operation and maintenance.
Details requirements for owner, technician, and training for safe maintenance and repair.
Outlines warranty terms, conditions, acceptance, period, and exclusions.
Identifies and describes the main parts of the aerial work platform.
Details the layout and controls of the ground control station.
Details the layout and controls of the platform control station.
Lists and describes the various actuators and sensors on the machine.
Provides specifications and safety guidelines for the engine.
Illustrates the lubrication points and schedule for the machine.
Details recommended consumables like oils, fuels, and coolant levels.
Lists general specifications and performance data for the machine.
Procedure for inspecting structural components for damage or wear.
Maintenance procedure for the wheel reducer, including oil change.
Guidelines for inspecting pins, bushings, and bearings for wear or damage.
Procedures for visually inspecting hydraulic cylinders and performing functional tests.
Instructions for safely filling the fuel tank.
Details the procedure for testing the machine's braking system.
Maintenance procedures for the slew ring, including lubrication and tightening.
Provides metric and SAE torque charts for various fasteners.
Criteria and procedures for replacing wheels and tires.
Provides torque values for coarse and fine thread screws and bolts.
Procedure for checking and replacing wear pads on pulleys.
Procedures for controlling battery electrolyte level and charging.
Step-by-step guide for replacing the hydraulic filter cartridge.
Procedure for changing glow plugs.
Procedure for wiring and using a universal plug with a tracker.
Outlines the schedule and types of inspections required for the machine.
Describes the daily checks to be performed by the user for safe operation.
Details scheduled preventive maintenance tasks and their frequency.
Specifies periodic inspection procedures and checks.
Outlines major inspection requirements at extended intervals.
General recommendations and description for troubleshooting machine malfunctions.
Detailed table of problems, probable causes, and solutions for troubleshooting.
Explains electric and hydraulic circuits, components, fuses, relays, and diagrams.
Provides electrical diagrams for various systems of the machine.
Illustrates the hydraulic system diagrams for the machine.
A log to record maintenance and repair interventions performed on the machine.
To Next Page
