Need help?Do you have a question about the Haulotte HA20RTJ and is the answer not in the manual?
General| Brand | Haulotte |
|---|---|
| Model | HA20RTJ |
| Category | Boom Lifts |
| Language | English |
Owner's, employer's, trainer's, and operator's obligations and duties.
General safety guidelines covering misuse, falling, overturning, electrocution, and fire hazards.
Instructions to prevent machine misuse, such as operating as a crane or exceeding load limits.
Safety measures for entering/exiting the platform and actions while on the platform.
Precautions to prevent tip-over, including load limits, wind speed, and slope considerations.
Safety distances from power lines and electrical safety precautions.
Safety measures related to batteries, fuel, and hot components.
Precautions to avoid crushing or collision hazards during machine movement.
Precautions to prevent uncontrolled movement, including parking and securing the machine.
Contact information for product safety inquiries and reporting incidents.
Guidelines on product information, ownership changes, and technical specifications.
Covers intended use and general safety rules for machine operation.
Explanation of hazard decals, symbols, colors, and their meanings.
Lists machine models covered by different standards.
Details the layout and components of the machine.
Covers the layout of the ground control box and the Activ'Screen display.
Covers the layout of the platform control box and its display panel.
Explains the DPF system and its regeneration processes.
Owner, manager, and operator responsibilities for machine readiness.
Factors for safe operation, including site traffic, ground conditions, and hazards.
Covers daily, periodic, reinforced, and major inspections.
Checks for E-stop, controls, fault detector, buzzers, engine cut-out, overload, slope warning, and speed limits.
Procedure to test the functionality of the E-Stop buttons.
Explanation of how to activate machine controls, including the deadman foot pedal.
Covers fault detection and indicator/LED tests.
Procedure to test the buzzer functionality on control boxes.
Conditions under which the engine automatically cuts out.
Operation and daily checks for the overload sensing system.
How the slope warning device alerts the operator and its behavior on slopes.
How travel speed is limited, particularly when the machine is unfolded.
General requirements for operating the aerial work platform.
Instructions for operating the machine from the ground control box.
Instructions for operating the machine from the platform control box.
Covers starting, stopping the engine, and boom/arm controls.
Covers starting, stopping, drive, steer, boom, arm, and additional controls.
Covers procedures for power loss, operator rescue, and no power situations.
Covers transport preparation, loading, unloading, towing, storage, and lifting.
Covers engine oil, hydraulic oil, and preheating procedures.
Shows machine dimensions in stowed/transport and access positions.
Details the mass of major machine components for different models.
Specifies sound and vibration levels according to EU directives.
Provides technical specifications and inspection/maintenance guidelines.
Details available options such as on-board generator, glazier's kit, Activ' Shield Bar, and swing gate.
Importance of regular maintenance, inspections, and using qualified technicians.
Information on service life and factors affecting it, emphasizing regular maintenance.
Covers inspection types (daily, periodic, reinforced, major) and responsibilities.
Guidelines for repairs, adjustments, and the use of genuine parts.
Covers After Sales Service and manufacturer's warranty details and conditions.
List of HAULOTTE subsidiaries and their worldwide contact details.
Proposition 65 warnings regarding vehicle and diesel engine exhaust exposure.
To Next Page