92 4000715370
E 06.18 - V2
USA / GB
HA20RTJ - HA20RTJ O - HA20RTJ PRO - HA61RTJ O - HA61RTJ PRO
C
- Pre-operation inspection
4.8 - TRAVEL SPEED LIMITATION
The machine has a selector of 3 driving speeds - low, medium and high.
All driving speeds are authorised when extending structure of the machine is in stowed
position (transport configuration). Drive speed is proportional to the movement of the drive
joystick ( 33 ). Adjust position of Jib to enhance field of vision during driving.
Whatever the position of the drive speed selector switch ( 45 ) on the platform control box, the
drive speed is limited when the machine is unfolded.
Daily check that the speed is limited to less than 1 km/h (0.6 mph) when :
• The boom is raised by more than 10° above horizontal.
• The boom is telescoped/extended more than 400 mm (16 in.).
• The arm is raised by more than 2 m (6 ft 7 in) above horizontal.
To Next Page
Loading...
