26 4000715370
E 06.18 - V2
USA / GB
HA20RTJ - HA20RTJ O - HA20RTJ PRO - HA61RTJ O - HA61RTJ PRO
B
- Familiarization
1.5 - SYMBOLS LEGEND AND DEFINITIONS
Symbols are used throughout this manual to depict hazards, avoidance measures and indicate
when information is required.
Refer to the following table to familiarize yourself with these symbols.
Symbol Description Symbol Description Symbol Description
Body crushing hazard
Foot crushing hazard
High pressure fluid ejection
hazard
Hand crushing hazard Entanglement hazard
Health/safety hazards
related to chemicals
Health-damaging effects
from hot work environment
Electrical contact or lightning
strike
Burns and scalds from
contact with flames,
explosion or radiation from
heat sources
Injury from Electric arcs -
Energy supply disconnecting
devices - Batteries fire,
emissions, etc
Risk of operator(s) falling
Tip over due to excessive
loading / wind load and
excessive ground slope
Relate and coordinate
directional arrows on the
chassis with those on the
control box
Do not put foot in this area
Do not put your hand in this
area
Keep away from product
working area
Never expose batteries and
electrical component to high
pressure washer
Ensure entry drop rail is
down
Flames prohibited
Maintain safe clearance from
high voltage electrically
charged conductors as
described in manual - Do not
use in thunderstorms
Overload
Refer to operator manual Safety belt
Use appropriate lanyard
attached to dedicated anchor
point.
Wheel pressure Enable switch
Use safety prop before
attempting any maintenance
work
Tow point Tie down point Lift point
Keep away from hot surfaces Wear protective equipment
x 1
To Next Page
Loading...
