EasyManua.ls Logo

Haulotte HA20RTJ - Cold Weather Recommendations

Haulotte HA20RTJ
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
114 4000715370
E 06.18 - V2
USA / GB
HA20RTJ - HA20RTJ O - HA20RTJ PRO - HA61RTJ O - HA61RTJ PRO
D
- Operation instructions
6 - Cold Weather Recommendations
In cold weather conditions, allow engine to run for at least 5 min to warm up ; before operating any
function thereby preventing any damage to the hydraulic system.
In extreme cold conditions, machines should be equipped with optional cold start kits.
Attempting to start engine when temperature is in the negative range, may require the use of a booster
battery.
If engine fails to start, do not crank for an extended time. Allow starter to "cool off" for a few minutes
before attempting again. If engine fails after several attempts, refer to the engine maintenance manual.
N.B.-:-INITIAL STARTING SHOULD ALWAYS BE PERFORMED FROM THE GROUND CONTROL BOX.
6.1 - ENGINE OIL
The correct SAE viscosity grade of oil is determined by the minimum ambient temperature during cold
engine start-up, and the maximum ambient temperature during engine operation.
Generally, use the highest viscosity oil that is available to meet the requirement for the temperature at
start-up.
N.B.-:-FOR ADDITIONAL ENGINE OIL RECOMMENDATIONS, REFER TO THE ENGINE MANUAL PROVIDED WITH THE
MACHINE
.
Engine oil viscosity
EMA LGR-1 / API CH-4 Viscosity
grade
Ambient temperature
Minimum Maximum
SAE 0W20 -40°C (-40°F) 10°C (50°F)
SAE 0W30 -40°C (-40°F) 30°C (86°F)
SAE 0W40 -40°C (-40°F) 40°C (104°F)
SAE 5W30 -30°C (-22°F) 30°C (86°F)
SAE 5W40 -30°C (-22°F) 40°C (104°F)
SAE 10W30 -20°C (-4°F) 40°C (104°F)
SAE 15W40 -10°C (14°F) 50°C (122°F)

Table of Contents

Related product manuals