96 4000715370
E 06.18 - V2
USA / GB
HA20RTJ - HA20RTJ O - HA20RTJ PRO - HA61RTJ O - HA61RTJ PRO
D
- Operation instructions
• A buzzer beeps in the following conditions :
• When power is switched on.
• When platform is overloaded (if fitted).
• When machine is on a slope greater than the rated slope.
• Emergency pump. ( Section D 4.1 In case of engine power failure)
• Indicators - All indicators (LEDs 101 - 117) are checked when the machine is powered on
1.4 - OPERATION OF OVERRIDING SYSTEM FROM GROUND CONTROL BOX
Please refer to paragraph D.4.2 To rescue operator in platform.
To Next Page
Loading...
