Need help?Do you have a question about the Haulotte HTA16P and is the answer not in the manual?
General| Brand | Haulotte |
|---|---|
| Model | HTA16P |
| Category | Boom Lifts |
| Language | English |
Defines the operator's obligations for safe use, inspection, and reporting issues.
Provides general safety guidelines and warnings for operating the aerial work platform.
Lists hazardous situations arising from improper or unintended use of the machine.
Details risks associated with falling from the platform and safe entry/exit procedures.
Covers risks of instability, exceeding capacity, and improper ground conditions.
Warns about electrical hazards and minimum safe approach distances from power lines.
Identifies risks related to batteries, fuel, and hot components.
Highlights dangers of being crushed or hit by the machine or its components.
Provides fundamental safety rules and guidelines for operating the aerial work platform.
Illustrates the safe operating zones and motion range for the 3522A - HTA13P model.
Shows the safe operating zones and motion range for the 4527A - HTA16P model.
Depicts the safe operating zones and motion range for the 5533A - HTA19P model.
Details checks for site traffic, ground conditions, load bearing, and hazards.
Outlines daily visual inspection and functional testing requirements before use.
Lists items for daily inspection of manuals, displays, controls, platform, and lift assembly.
Continues daily checks for rotation system, cylinders, hydraulics, and engine components.
Covers daily checks for electrical cables, sensors, safety devices, and machine information.
Describes the procedure to test the functionality of the Emergency Stop buttons.
Outlines the procedure to verify the correct operation of outrigger safety interlocks.
Lists essential steps to perform before operating the aerial work platform.
Explains how to turn the machine on/off and activate controls from the ground box.
Details how to energize the platform control box and start/stop the machine from it.
Explains how to operate boom raising, lowering, telescoping, and jib movements.
Describes how to control turntable rotation and platform leveling from the ground box.
Details the procedure for starting and stopping the machine using the platform control box.
Explains platform controls for boom raising, lowering, telescoping, and jib movements.
Describes platform control for turntable rotation and platform leveling.
Introduces the outrigger controls and their functions for auto and manual leveling.
Details outrigger deployment, leveling, and safety interlocks related to boom position.
Covers manual boom operations and emergency egress during power loss.
Explains manual retraction, rotation, and lowering of booms.
Details procedures for safely lowering an operator from the platform in emergencies.
Covers manual operations when power is lost or systems fail.
Emphasizes the importance of regular maintenance, inspections, and avoiding unauthorized modifications.
Specifies the scope and responsibility for conducting daily inspections before operation.
Stresses that repairs must be done by HAULOTTE® technicians using genuine parts.
To Next Page
