What to do if Haulotte HTL 3010 show F04.24 (D) Left-hand stabiliser solenoid valve fault?
If you're getting an F04.24 (D) error for the left-hand stabiliser solenoid valve, check YV122, YV700 and YV720.
What should I do if my Haulotte Boom Lifts display F05: Joystick error?
If your Haulotte Boom Lifts are showing an F05 error indicating a joystick problem, check SJ120.
What to do if Haulotte HTL 3010 show F02: Contactor error?
If you encounter an F02 error related to the contactor, check KM120.
What to do if Haulotte HTL 3010 Boom Lifts display F03: Relay error?
If your Haulotte Boom Lifts are displaying an F03 error, indicating a relay issue, check KA160.
What to do if Haulotte Boom Lifts show F04.05 (D) Boom lifting PWM solenoid valve fault?
If you're getting an F04.05 (D) error for the boom lifting PWM solenoid valve, check YV300 or YV320.
What to do if Haulotte HTL 3010 show F02.03(D) Main contactor fault?
If you are experiencing an F02.03(D) error related to the main contactor fault, check KMG.
What to do if Haulotte HTL 3010 Boom Lifts display F04.30 (D) Floating lift TOR solenoid valve?
If you're experiencing an F04.30 (D) error related to the floating lift TOR solenoid valve, check YV380.
What to do if Haulotte HTL 3010 display F04.25 (D) Right-hand stabiliser solenoid valve fault?
If you're getting an F04.25 (D) error for the right-hand stabiliser solenoid valve, check YV122, YV701 and YV721.
What to do if Haulotte HTL 3010 display F05.04 (D) Joystick operation defect (Lifting)?
If you're experiencing an F05.04 (D) error related to a joystick operation defect during lifting, check SJ120.
What to do if Haulotte Boom Lifts display F02.05(D) Pre/post heating relay fault?
If you are experiencing an F02.05(D) error related to the pre/post heating relay fault, check KM160.
General| Platform Capacity | 230 kg |
|---|---|
| Weight | 6, 650 kg |
| Turning Radius | 3.9 m |
| Drive Speed | 4 km/h |
| Fuel Type | Diesel |
Details prohibitions, potential hazards like tip-over, electrical, travel, and load falling.
Overview of controls within the operator's cab.
Step-by-step procedure for safely starting, operating, and shutting down the engine.
Essential safety rules for lifting, handling, and transporting loads.
Instructions for loading and securing the telehandler for transportation.
How to read and interpret load capacity charts for safe operation.
General precautions and procedures for towing a broken-down vehicle.
Procedure for manually lowering the boom in an emergency.
Daily, interval, and component checks across various operating hours.
Procedure for diagnosing and reporting faults indicated by LEDs.
To Next Page