What to do if Haulotte Boom Lifts show F04.24 (D) Left-hand stabiliser solenoid valve fault?
If you're getting an F04.24 (D) error for the left-hand stabiliser solenoid valve, check YV122, YV700 and YV720.
What should I do if my Haulotte Boom Lifts display F05: Joystick error?
If your Haulotte Boom Lifts are showing an F05 error indicating a joystick problem, check SJ120.
What to do if Haulotte Boom Lifts show F02: Contactor error?
If you encounter an F02 error related to the contactor, check KM120.
What to do if Haulotte HTL 3510 Boom Lifts display F03: Relay error?
If your Haulotte Boom Lifts are displaying an F03 error, indicating a relay issue, check KA160.
What to do if Haulotte Boom Lifts show F04.05 (D) Boom lifting PWM solenoid valve fault?
If you're getting an F04.05 (D) error for the boom lifting PWM solenoid valve, check YV300 or YV320.
What to do if Haulotte Boom Lifts display F05.08 (D) Joystick operation defect (Attachments)?
If you're experiencing an F05.08 (D) error related to a joystick operation defect with attachments, check SJ120.
What to do if Haulotte Boom Lifts display F04.33 (D) Steering mode TOR solenoid valve fault?
If you're experiencing an F04.33 (D) error related to the steering mode TOR solenoid valve, check YV680 or YV681.
What to do if Haulotte Boom Lifts show F05.07 (D) Joystick operation defect (Equipment carriage compensation)?
If you're experiencing an F05.07 (D) error related to a joystick operation defect with equipment carriage compensation, check SJ120.
What to do if Haulotte Boom Lifts display F05.04 (D) Joystick operation defect (Lifting)?
If you're experiencing an F05.04 (D) error related to a joystick operation defect during lifting, check SJ120.
What to do if Haulotte HTL 3510 Boom Lifts display F02.05(D) Pre/post heating relay fault?
If you are experiencing an F02.05(D) error related to the pre/post heating relay fault, check KM160.
Details on hazards and precautions to prevent machine tipping.
Table detailing inspection and maintenance responsibilities and frequencies.
Daily visual inspection of mechanical components with the engine off.
Comprehensive inspection checklist for various machine parts before operation.
LMI display, controls, and its function in ensuring machine stability.
Essential safety rules for lifting, transporting, and placing loads.
Criteria for determining if an attachment is approved for use with the machine.
Importance of checking attachment approval and possessing relevant capacity charts.
How to properly use the capacity chart to determine safe load limits.
Step-by-step guide for manually lowering the boom in an emergency.
Schedule indicating lubrication and maintenance tasks based on operating hours.
Testing and checking procedures for the load moment indicator.
General procedure for troubleshooting, including noting fault codes and LED status.
Table of faults, their descriptions, and corresponding solutions for troubleshooting.
General| Brand | Haulotte |
|---|---|
| Model | HTL 3510 |
| Category | Boom Lifts |
| Language | English |
To Next Page