Need help?Do you have a question about the Haulotte H43TPX and is the answer not in the manual?
General| Brand | Haulotte |
|---|---|
| Model | H43TPX |
| Category | Lifting Systems |
| Language | English |
General guidelines and conditions to avoid when operating the machine, including environmental factors.
Specific conditions to avoid during operation, such as exceeding load limits or working in confined areas.
List of actions and uses strictly forbidden during machine operation to ensure safety and prevent damage.
Identification of potential risks associated with machine operation, including command system disturbance and falling.
Details on electrocution risks, especially near power lines, and required minimum safety distances.
Guidance on preventing uncontrolled movement and overturning, including surface checks and load distribution.
Safety measures to prevent crushing and collision, including body positioning and area awareness.
Details the operator's duties, including manual understanding, reporting issues, and proper machine use.
Identifies responsibilities for pre-delivery, pre-operation, and periodical inspections and maintenance.
Daily visual inspection and functional tests required before starting work or changing operators.
Detailed checks for machine components like identification plates, labels, and overall structural integrity.
Tests for emergency stop buttons, tilt sensor, alarms, load management, and boom control systems.
Tests for emergency stop buttons, tilt sensor, alarms, load management, and boom control systems.
Procedure to test controls on the ground control box for both H28TJ+ and H43TPX models.
Procedure to test controls on the platform control box for driving station operations.
Requirements for regular machine inspections, frequency, record-keeping, and availability of inspection reports.
Step-by-step procedure for testing the emergency stop button on different control boxes and machine models.
Step-by-step procedure for testing the emergency stop button on different control boxes and machine models.
Procedure for testing the tilt sensor, including its audible signal and effect on machine deployment.
Step-by-step guide for starting the machine from the ground control box, including pre-heating and starter operation.
Details on controlling movements like jib lifting, boom telescoping, and platform leveling from the ground.
Procedure for starting the machine from the platform control box, including emergency stop and starter operation.
Procedure for starting the machine from the platform control box, including emergency stop and starter operation.
Procedure for safely shutting down the machine when operating from the platform.
Instructions for controlling driving, steering, boom, and jib movements from the platform control box.
Details on controlling turntable rotation, platform rotation, leveling, and boom telescoping from the platform.
Instructions for controlling driving, steering, boom lifting, jib lifting, and platform rotation from the platform.
Details on drive speed, platform movement speed, boom telescoping, and jib rotation from the platform.
Steps to prepare the machine before axle extension or retraction, including localizing control consoles.
Steps to prepare the machine before axle extension or retraction, including localizing control consoles.
Detailed steps for extending the front axle, including lever operations and buzzer indications.
Detailed steps for retracting the front and rear axles, including lever operations and buzzer indications.
Procedure for putting the machine into transport configuration using the transport positioning box controls.
Procedure for putting the machine into transport configuration using the transport positioning box controls.
Procedure for placing the machine into working configuration from the transport positioning box.
Principle of emergency lowering from the ground when the platform operator cannot operate controls.
Step-by-step procedure for emergency lowering using the ground control box for different machine models.
Principle of the lowering for repairs function using the electric pump for controlled descent.
Procedure for lowering the platform using back-up power, with recommendations for operator safety during exit.
General principles for safe loading/unloading, including ramp checks, boom positioning, and avoiding sliding.
Detailed steps for securing the machine in transport position using platform and ground control boxes.
Procedure and stability tables for testing machine stability under various load and angle conditions.
To Next Page
