EasyManua.ls Logo

Haulotte HA46JRT User Manual

Haulotte HA46JRT
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator manual
12
TO
26
M
ENGINE
-
POWERED
ARTICULATED
LIFTS
24203 3237 0 E 09 07 EN
Operator manual
12 TO 26M ENGINE-POWERED ARTICULATED LIFTS
HA12PX (HA33JRT ) - HA16X -
HA16SPX (HA46SJRT) - HA16PX
(HA46JRT) - HA18SPX (HA51SJRT) -
HA18PX (HA51JRT) - HA20PX
(HA61JRT) - HA260PX (HA80JRT)
EN

Table of Contents

Other manuals for Haulotte HA46JRT

Question and Answer IconNeed help?

Do you have a question about the Haulotte HA46JRT and is the answer not in the manual?

Haulotte HA46JRT Specifications

General IconGeneral
Turning Radius13 ft 9 in
Drive Speed4.3 mph
Power SourceDiesel
Platform Capacity500 lb
Weight15432 lb
Drive Type4WD
Horizontal Outreach39 ft 9 in
Lift Capacity500 lb
Horizontal Reach39 ft 9 in
Machine Weight15432 lb

Summary

Safety Precautions

Pre-operation Instructions

Guidelines for general and specific conditions under which the machine should not be operated.

Operation Instructions

Prohibitions and potential risks associated with operating the machine.

Intervenor's Responsibility

Operator's Responsibility

Operator's duties, including understanding the manual and safe operation of the machine.

Operating Principle

Machine Tilt

Operator warnings and permitted movements when the machine is on a slope.

Radius Limitation

Function of the radius limitation LED and driving restrictions in this zone.

Driving

Checks Before Use

Daily visual inspections and functional tests required before operating the machine.

Functional Tests

Tests for safety features and controls on lower and upper consoles.

Ground Operations

Detailed steps for machine start-up, shutdown, and fuel changeover.

Movement Control

Instructions for controlling machine movements using lower and upper console controls.

Special Procedure

Emergency Lowering

Principle and procedure for emergency lowering of the platform.

Loading and Unloading

Principles and procedures for safely loading and unloading the machine.

Detection of Internal Fault

Principle of the defect detection system and procedure for handling faults.

Technical Characteristics

ANSI Standard Specificities

Tests required by ANSI standards, including overload, operational, and stability tests.

Related product manuals