Haulotte HA26 RTJ O User Manual

110 4001055180 E 06.21 USA / GB
HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW -
HA80 RTJ O - HA80 RTJ PRO
D - Inspection and maintenance schedule
4 - Periodic inspection
The Periodic inspection is a thorough inspection of the operation and safety features of the machine. This must
take place prior to the sale or resale of the machine and every 1 year. Local regulations may have specific
requirements on frequency, and content of inspections.
This intervention must take place after :
• Extensive dismantling and reassembly
• Repairs involving the machine's essential components
• Any accident causing stress to the machine
This inspection is the responsibility of the owner, and must be conducted by a qualified technician.
Under no circumstances may this inspection replace the control required by local regulations.
Use the detailed program below.
Periodic
Page or
associated
procedure
Periodic
OK NOK
Corrected
Comments
Chassis assembly : Wheel, reducer, steering, wheel pivot
Check state of tires/tyres and inflations
Motor
Check that there are no leaks from the
engine's components (engine, hose, radiator)
Check the condition of the battery
Check for visible damage and broken welds
on the exhaust system
Check the operation of the lock on the engine
casing
Turntable
Test the operation of the turntable locking
system
Hydraulic : oils, filters and hoses
Check the hoses, blocks and pumps, fittings,
cylinders and the tank for the absence of
leaks, deformations and damage
Platform
Test the automatic closure and locking of
access basket
Check that the harness anchor points are not
cracked or damaged

Haulotte HA26 RTJ O Specifications

General

Brand	Haulotte
Model	HA26 RTJ O
Category	Construction Equipment
Language	English