What causes the buzzer to sound and platform controls to not respond on Haulotte Boom Lifts?
If the platform controls of your Haulotte Boom Lift do not respond and the buzzer is sounding, it could be because the axle is not fully extended or retracted, or the outrigger cylinder is not fully retracted. Fully extend or retract the axles, and fully retract the outrigger cylinder.
General| Weight | 48, 281 lb |
|---|---|
| Drive Speed | 3.1 mph |
| Gradeability | 40 % |
| Power Source | Diesel |
| Working Height | 14.2 m |
| Maximum Working Height | 14.2 m |
| Platform Height | 12.5 m |
| Maximum Platform Height | 12.5 m |
| Horizontal Outreach | 7.8 m |
| Horizontal Reach | 7.8 m |
| Up and Over Clearance | 6.7 m |
| Platform Capacity | 230 kg |
| Lift Capacity | 230 kg |
| Overall Length | 6.2 m |
| Machine Length | 6.2 m |
| Overall Width | 2.3 m |
| Machine Width | 2.3 m |
| Overall Height | 2.5 m |
| Machine Height | 2.5 m |
| Turning Radius | 4.2 m |
| Turret Rotation | 360° continuous |
| Jib Length | 1.5 m |
| Ground Clearance | 0.3 m |
| Platform Size | 1.8 x 0.8 m |
| Stowed Dimensions (LxWxH) | 6.2 x 2.3 x 2.5 m |
Provides guidance on using the maintenance book and contacting HAULOTTE Services for support.
Details maintenance tasks, their frequency, and recommended intervals.
Outlines different inspection types (periodic, reinforced, major) and required procedures.
Provides procedures and checklists for essential daily pre-operation checks.
Details the thorough checks required for periodic maintenance to ensure safety.
Offers solutions for common problems by identifying probable causes and necessary actions.
Identifies the location and electrical rating of all fuses within the machine's circuit.
Pinpoints the location and describes the function of critical safety sensors and switches.
To Next Page