201 4001005000
E 06.21
USA / GB
Chassis and turret
Wheel replacement
MS0123
Chassis and turret
Wheel repl acement
1 - You will need
2 - Preliminary operation
For safety reasons, imperatively respect the following stages during the tests :
• To set up a beaconing of safety around the test area.
• Put the machine in stowed position.
The operations of disassembling if they exist should be carried out only on the installations completely disconnected
and must be entrusted only to people having the necessary technical training.
Respect, in addition to the instructions appearing in the present instructions, the legal tendencies generally applicable
for safety accident prevention.
All the precautions must be done in work before intervening on and near the machine.
After completion of work, all the covers and safety devices must be positioned back completely and operational.
3 - Technical specifications
• Standard tool kit
• Protective goggles
• Gloves
• Jack
• Hoist
• Torque wrench
• Place barriers around the perimeter of the work area
Characteristics Standard wheel
Ty p e Solid tires/tyres
Wheel mass 278 kg +/- 6 kg (613 lbs +/- 13 lbs)
Size 1025/365 mm (3 ft 4 in / 1 ft 2 in)
To Next Page
Loading...
