EasyManuals Logo

Hauppauge WinTV-PVR-USB2 MCE User Manual

Hauppauge WinTV-PVR-USB2 MCE
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© Hauppauge Computer Works, Inc. 2004, 2005
Hauppauge Computer Works, Inc. Telephone: 631-434-1600
91 Cabot Court Fax: 631-434-3198
Hauppauge, NY 11788 Tech Support: 631-434-3197
techsupport@hauppauge.com
Hauppauge Computer Works, GmbH Telephone: 02161-694880
Krefelder Straße 669 Fax: 02161-6948815
41061 Mönchengladbach, Germany Tech Support: 02161-6948840
info@hauppauge.de
Hauppauge Computer Works, Ltd Telephone: 0207-378-1997
6-10 Bank Chambers Fax: 0207-357-9171
Borough High Street Tech Support: 0207-378-0202
London, U.K. SE1 9QQ support@hauppauge.co.uk
www.hauppauge.com
Included with WinTV-PVR-USB2 MCE:
WinTV-PVR-USB2 box, with 125 channel cable ready TV tuner, FM
radio receiver, MPEG-2 hardware audio/video compressor
FM radio antenna
Wall mounted power supply
WinTV-PVR MCE Driver Installation CD-ROM with drivers for
Windows XP Media Center Edition 2005
WinTV-PVR-USB2 MCE Quick Installation Guide (this guide)
Remote control transmitter with batteries (some models)
Remote control receiver (USB) with IR “blaster” for controlling
external set top boxes (some models)
4
1
After Media Center returns with the You’re Done! message, your WinTV-PVR will
have been set up by Media Center Edition.
Now, you need to set up the Electronic Program Guide. Media Center should auto-
matically launch the Guide set up. You will see a message: Set Up Your
Program Guide. Click Next.
Chose your region and the wizard will move you toward the completion of the
Program Guide set up.
If you cannot find the Radio button in
Media Center
If you install the WinTV-PVR with FM radio, but the Radio button does not appear
on the Start menu, Media Center might not have detected the added tuner yet.
Go to Radio Settings to initiate a check for an available FM radio-enabled tuner.
To go to Radio Settings:
1. Press the START button on the remote, and then select Settings.
2. Select Radio. Media Center will check for a tuner that supports FM
radio.
3. One of the following may occur:
- You will be notified if Media Center is unable to detect a tuner that sup-
ports FM radio. Try enabling the tuner again.
- Media Center detects the tuner and the FM Radio Presets page
appears. However, if the Radio button still does not appear on the Start
menu, you may need to turn on Radio in Set Program Access and
Defaults (see below).
To turn on FM radio in Set Program Access and Defaults:
1. Close Media Center.
2. Click the Start button on the taskbar, point to All Programs, and
then click Set Program Access and Defaults.
3. Select Custom. Click the down arrow button to expand the option.
4. Under Choose a default media player, select the check box next
to Media Center Radio. Click the button Enable access to this
program for Media Center Radio. When the box is selected,
Radio will appear on the Media Center Start menu; when the box is
cleared, Radio will not appear.
QI-MCE-V3.2-ENG
June. 31, 2005
WinTV-PVR-USB2 MCE
Personal Video Recorder
Quick Installation Guide
for
Windows XP Media Center Edition
2005

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hauppauge WinTV-PVR-USB2 MCE and is the answer not in the manual?

Hauppauge WinTV-PVR-USB2 MCE Specifications

General IconGeneral
BrandHauppauge
ModelWinTV-PVR-USB2 MCE
CategoryDVR
LanguageEnglish

Related product manuals