Haussmann Xpert 59695003 User Manual

Modèle/ Model:
HSMS15A-10-DB
SCIE À ONGLETS COMBINÉE
COULISSANTE 15A 10 po/12 po
À DOUBLE BISEAU
15A- 10”/12”DOUBLE BEVEL
SLIDING COMPOUND MITRE SAW
Manuel de l’utilisateur (p.2)
Operator’s manual (p.27)
HSMS15A-12-DB
59695003
59695004
C
S
L
I
Service à la clientèle / Customer Service: 1-866-206-0888
Notre personnel du service à la clientèle est disponible pour vous
aider. Pour obtenir de l’aide pour le montage de votre produit,
pour signaler des pièces endommagées ou manquantes, ou pour
toute autre information à propos de ce produit, veuillez composer
notre numéro sans frais.
ENREGISTREZ VOTRE PRODUIT
Nous vous invitons à enregistrer votre produit en ligne an
de faciliter les communications; pour ce faire, veuillez visiter
le www.outilshaussmann.com.
CONSERVEZ CE GUIDE
Vous aurez besoin de ce guide pour les règles de sécurité, les
procédures d’utilisation et la garantie. Conservez-le avec la
facture d'origine dans un endroit sûr et sec pour référence
future.
Our Customer service staff is available to help you. For help with
product assembly, to report damaged or missing parts, or for any
other information about this product, please call our toll-free
number.
REGISTER YOUR PRODUCT
We invite you to register your product online to make future
communications easier. To do so, simply visit our website
www.haussmanntools.com.
SAVE THIS MANUAL
You will need this manual for safety measures, operating
instructions et warranty information.. Keep this manual and
the original sales invoice in a safe, dry place for future
reference.

Haussmann Xpert 59695003 Specifications

General

Brand	Haussmann Xpert
Model	59695003
Category	Saw
Language	English

Summary

Product Description, Specs, and Symbols

Specifications

Technical details and measurements for the 10" and 12" mitre saws, including voltage, speed, and cutting capacities.

General Safety Precautions

Mitre Saw Specific Safety Guidelines

Electrical Safety Precautions

Precautions regarding power supply and avoiding electrical hazards when using the tool.

Extension Cords and Recommendations

Guidelines for selecting and using extension cords, including a table of recommended sizes based on tool rating.

Service Requirements

Mitre Saw Operational Safety

Essential safety measures specific to operating mitre saws, including guard usage, cutting materials, and operator positioning.

Tool Operation and Adjustments

Bench Mounting

Adjustments and 0° Bevel Check

Procedures for checking and adjusting the saw's 0° bevel alignment using a combination square.

45° Bevel Stop Calibration

Steps to check and calibrate the right and left 45° bevel stops using a combination square and adjustment screws.

Setting Table Square to Blade

Changing the Saw Blade

Step-by-step guide for safely removing and installing a new saw blade, including necessary precautions.

Cross-Cutting Without Slide Action

Instructions for performing crosscuts on narrower workpieces without engaging the slide mechanism.

Cross-Cutting With Slide Action

Procedure for making crosscuts on wider workpieces using the saw's slide mechanism.

Bevel Cuts

How to perform bevel cuts by angling the saw blade relative to the mitre table and workpiece.

Compound Mitre Cuts

Guidance on making cuts that combine both mitre and bevel angles, used for complex joinery.

Tool Maintenance and Cleaning

Carbon Brushes

Motor Brush Replacement

General Inspection Before Use