To Next PageTo Next Page
Need help?Do you have a question about the Haussmann Xpert HSMS15A-10-DB and is the answer not in the manual?
General| Brand | Haussmann Xpert |
|---|---|
| Model | HSMS15A-10-DB |
| Category | Saw |
| Language | English |
Lists and identifies all numbered components of the saw for user familiarization.
Explains symbols on the tool's rating plate, crucial for understanding its use and safety.
Provides detailed technical specifications for both HSMS15A-10-DB and HSMS15A-12-DB models.
Outlines critical safety practices for tool operation, covering workspace, attire, and handling.
Covers essential electrical safety measures to prevent hazards like shock and damage.
Provides safety guidelines for tool servicing, emphasizing qualified personnel and correct parts.
Details safety protocols unique to mitre saws, including guard usage and cutting procedures.
Describes included accessories, unpacking steps, and safe methods for transporting the mitre saw.
Guides on securely mounting the saw to a bench and adjusting the operating handle position.
Details how to adjust the tension of the handle clamp for secure operation and stability.
Explains the use of the stabilizer bar for stability and the release knob for securing the saw arm.
Details how to use the slide lock for transport and the mitre table lock for setting cutting angles.
Instructions for setting and adjusting the bevel angle of the saw arm.
Procedure to check and calibrate the saw's 0° bevel position for accurate cuts.
Steps to check and calibrate the 45° right and left bevel stops for accurate angle cutting.
Instructions for using the clamp assembly and the spindle lock button for blade changes.
Details the function of the rotating blade guard and how to attach the dust bag for dust collection.
Step-by-step guide on how to safely power the saw on and off using the safety button and trigger.
How to operate the integrated LED work light to illuminate the cutting area.
Procedure to ensure the mitre table is perfectly square to the saw blade for accurate cuts.
Steps to align the fence perpendicular to the mitre table for precise crosscuts.
Detailed instructions and safety warnings for safely removing and installing a new saw blade.
Guide to performing crosscuts on narrower workpieces without engaging the slide mechanism.
Instructions for cutting wider workpieces using the saw's slide action for increased capacity.
How to perform cuts with the blade angled relative to the workpiece for bevel effects.
Guide to performing cuts that combine both mitre and bevel angles simultaneously.
Guidelines for tool maintenance, cleaning with compressed air, and caution regarding cleaning agents.
Advice on blade maintenance, including identifying dullness and cleaning pitch.
Recommendations for lubricating moving parts and inspecting/replacing carbon brushes for motor efficiency.
Guidance on inspecting the drive belt for wear and performing general checks before each operation.
Outlines the product's warranty period, terms, and the process for registering the product.
