Ⓑ Image area
Ⓒ View identification
In 2D view mode, it indicates the orientation of the current view.
Ⓓ Top view area
Ⓔ Function bar
Tap 360 button to view more functions, please refer to the actual vehicle.
Functions select and option button introduction
Tap this button to exit panoramic view image.
【Automatic parking】
Tap this button to activate the fully automatic parking system. (▷ Page 98)
【Reversing tracking】
Tap this button to activate auto reversing assistance function. (▷ Page 100)
【2D/3D】
Tap the button to switch the view mode between 2D and 3D.
【Radius lines】
Tap this button to display or close radius lines. The radius lines display the body width, which can
assist the driver in parking.
【Transparency】
In the 3 D view mode, touch the car model transparency settings button to change the model
transparency.
When the vehicle model transparency is selected as 1 0 0 % , the vehicle bottom transparency
function will be activated.
After the vehicle bottom transparency function is activated, the image interface will gradually
display the image of the road under the vehicle as the vehicle moves. It will automatically switch
to the previous image after the obstruction is removed.
【Intelligent view】
You can activate or deactivate the intelligent view switch function. After the function is activated:
When the vehicle is in gear D, if the front sensor detects an obstacle less than or equal to 1m from
the vehicle body, it will automatically switch to the front top image.
When the vehicle is in gear R, if the rear sensor detects an obstacle less than or equal to 1m from
the vehicle body, it will automatically switch to the rear top image.
【Auxiliary view】
Tap this button to switch the image view between default view (when the auxiliary view is turned
off), (wheels view) and wide angle.
【MOD】
You can activate or deactivate the detect function of the moving object. After the function is
activated, when a moving pedestrian is detected, the image interface will display an alarm
message.
【Car wash view】
Tap this button to activate or deactivate the car wash view. After the mode is turned on, the tire
track is displayed, which can assist the driver in entering and exiting the vehicle wash.
To Next Page
Loading...
