EasyManua.ls Logo

HAVAL H6 - Page 110

Default Icon
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
110
Turning on the system
During driving, push the lever to the steering
wheel to the [CRUISE] position and release it
to activate the cruise assist function. The
minimum vehicle speed that cruise assist can
be set to is 30 km/h.
Push the control lever once, and the adaptive
cruise control is started and the instrument
shows prompt.
Push the control lever twice in succession,
and the intelligent cruise control is started
and the instrument shows prompt.
Notice
When the adaptive cruise control function is
on, the following basic conditions must be met
before the cruising speed of the vehicle can be
set:
All doors are completely closed.
The driver is already wearing their seat belt.
The vehicle has been started and is in D gear.
ESP is activated.
The parking brake is not applied.
The vehicle speed is less than 150 km/h.
The vehicle driving mode is normal, ECO or
sport mode.
When the intelligent cruise control mode is
activated, the following basic conditions must
be met before the cruise speed can be set:
All doors are completely closed.
The driver is already wearing their seat belt.
The vehicle has been started and is in D gear.
ESP is activated.
The parking brake is not applied.
The vehicle speed is less than 150 km/h.
The system has detected lane markings.
If the vehicle speed is less than 60 km/h, a
moving target must be detected.
The vehicle driving mode is in the normal,
ECO or sport mode.
Setting the speed
Push the control lever upwards or downwards
to + or - position and release it to
increase or reduce the cruising speed slightly.
Push the control lever upwards or downwards
to+or-position and hold it to increase
or reduce the cruising speed continuously.
When the desired speed is reached, release the
control lever.
Notice
Only when the road ahead is clear will the
vehicle accelerate to the speed set. Otherwise,
it will follow the vehicle ahead, maintaining the
vehicle distance set.
Cancel the cruise speed
There are two ways to cancel cruise:
Depress the brake pedal.
Push the control lever in the direction away
from the steering wheel to CANCEL
position and then release it.
To resume cruise control, push the control lever
along the steering wheel to the CRUISE
position and then release it.
Adjusting the distance
Push the adjusting the distance to adjust the
distance.
The distance is not a fixed distance, and it is the
actual distance between the vehicle and the
front vehicle. The actual distance between the
vehicle and the front vehicle will vary with the
vehicle speed of the vehicle under the same
distance.
Notice
Setting a low distance may result in a
delay in reaction in the event of unexpected
situations, and it is always your responsibility
to adjust the distance appropriately.
When driving on wet and slippery roads than
when driving on dry roads.

Related product manuals