If the sunroof reverses when closing, you can
force it to initialize as follows:
1. When the sunroof reverses, immediately
press and hold the sunroof button down,
and after it stops reversing, continue to
hold the sunroof button down until the
sunroof is fully closed and clicks into place.
2. Within 5 seconds, press and hold the
sunroof button down again until the
sunroof has opened and then fully closed
again. Initialization of the sunroof is
complete.
If the sunshade reverses during closing, you
can force it to initialize as follows:
1. First, completely close the sunroof.
2. Close the sunshade again and once it
begins to reverse, immediately press and
hold sunshade button down. After it stops
reversing, continue to hold the sunshade
button down until the sunshade jitter and
then release the button.
3. Within 5 seconds, press and hold the
sunshade button down again until the
sunshade has opened and then fully
closed again. The initialization of the
sunshade is complete.
To Next Page
Loading...
