Light control combination switch
Main light switch
Notice
Before you lock and leave the vehicle, please
turn the lamp switch to the OFF or AUTO
position to reduce the power consumption of
the vehicle and prevent the loss of battery
power from affecting the normal use of the
vehicle.
D0F97216C02B
Twist the main light switch to the side lights
position, to turn on the position lights
and license plate light.
⚠ Caution
When driving do not use position lights
instead of low beam headlights. Otherwise,
there is the risk of an accident.
Because the sidelights are not bright enough
to illuminate the road in front of the vehicle or
to allow other vehicles and pedestrians to see
the vehicle, with dark skies or poor visibility,
turn on the low-beam.
Twist the master light switch to the low-
beam position to turn on the low-beam,
the position lights and license plate light
remain on.
Twist the master light switch to the AUTO
position and the clearance lights and low-
beam will automatically turn on or off
according to the brightness of the ambient
light.
⚠ Caution
The lights may not automatically turn on
during the day when the field of view is
affected by heavy fog. Turn on the lights
manually.
Automatic lighting controls are only an aid
to driving. At all times, the driver is
responsible for the vehicle lights.
Twist the main light switch to the OFF
position to turn off all lights.
Fog lamp switch
D9AA17A1B508
When the clearance lamps (position lamp,
license plate lamp) are illuminated, turn the
fog lamp switch to the front fog lamp position
to turn on the front fog lamp.
When the low-beam is on, twisting the fog
lamp switch to the rear fog lamp position
turns the rear fog lamp on or off. When you
release the knob, it will go back to its original
position.
To Next Page
Loading...
