Ⓐ Parking gear button
Ⓑ Shift knob
Shift to P gear
When the vehicle is stationary, press the
parking gear button.
Shift to gear D, R, or N
For disengagement of gear P and engagement
of gear R or D from gear N, it is necessary to
depress the brake pedal and turn the shift knob
to the left or right.
For engagement of gear N from gear R or D, just
turn the shift knob to the left or right.
Notice
When the vehicle is in P gear, depress the brake
pedal and turn the knob counterclockwise
continuously to switch directly to R gear.
The engaged gear will be shown on the shift
panel and the multi-information display of
the virtual instrument.
⚠ Warning
When the instrument prompts a transmission
related fault message, the transmission can
only be shifted into a specific gear or cannot
switch at all. Please park in a safe place as soon
as possible and contact the service provider.
Creep function
After the vehicle is started, you shall switch to
the driving position, and release the parking
brake and the brake pedal. At this time, you
don't need to step on the accelerator pedal,
and the vehicle can crawl slowly.
Start the vehicle
Normal driving off
1. Fasten your seat belt and confirm that you
have applied the parking brake.
2. Start the vehicle.
3. Depress the brake pedal and switch the gear
to the D gear.
4. Release the brake pedal and then gently
press the accelerator pedal to accelerate.
Notice
When the vehicle drives off, the automatic
departure function will automatically release
the parking brake.
Launch Control
1. Fasten your seat belt and confirm that you
have applied the parking brake.
2. Start the vehicle and confirm that the ESP
function is turned off.
3. Depress the brake pedal, to change the gear
position to D gear, and release the parking
brake.
4. Depress the accelerator pedal fully and the
instrument panel indicates “launch control
activated”.
5. Release the brake pedal and the vehicle
starts in launch until driving off is complete.
To Next Page
Loading...
