Anti-collision sensor
System introduction
The anti-collision sensor installed is a type of sensor. When parking, the sensors detect whether there
is an obstruction in front of or behind the vehicle and the distance to the obstruction, and issue an
audible alert to assist the driver’s safety and help make parking easy.
How to use
BAC5DCCA8D8A
When the power switch is in ON mode, the anti-collision sensors can be opened or closed
manually by pressing the button.
Switch to the gear R and the anti-collision sensors will automatically turn on.
When the P gear is engaged, the AVM will be turned off automatically.
If the moving speed exceeds 15 km/h, the anti-collision sensors will be automatically stopped.
Detection scope and alarm mode
Notice
Due to different vehicle configurations, some vehicles may not be equipped with a front central
sensor, please refer to the actual vehicle.
When the anti-collision sensor is switched on, if the sensor detects an obstruction within range, it
will sound an alarm.
As the distance between the vehicle and the obstruction shortens, the frequency of the warning
sound will gradually increase, and when the distance between the obstacle and the vehicle is within
about 0 . 3 m, the warning will sound for longer. At this point in order to avoid a collision you must
stop the vehicle.