Need help?Do you have a question about the Haverland RCTT and is the answer not in the manual?
Guides the initial startup sequence and display modes.
Explains how to set temperature and operate the device in manual mode.
Details the 7 pre-programmed plans and their usage for heating situations.
How to set the time and change the device language.
Instructions for programming the specific day of the week.
Guide to selecting the desired comfort temperature setting.
Guide to selecting the desired economy temperature setting.
Explains how to configure a personalized heating plan when pre-set plans are insufficient.
Details setting the start time for the first comfort period on weekdays.
Details setting the start time for the first economy period on weekdays.
Setting start times for various comfort and economy periods.
Instructions for programming heating periods for Saturday and Sunday.
Important considerations for setting up programming periods, including unused ones.
How to turn the display light on and off.
Information about the anti-freeze plan and its specific conditions.
How to activate and deactivate the keypad lock to prevent accidental changes.
Explains the standby mode and how it preserves programming parameters.
Instructions for disconnecting the device and requirements for re-programming if off for over 24 hours.
General| Timer | Yes |
|---|---|
| Eco Mode | Yes |
| Installation | Wall Mounted |
| Safety Features | Overheat protection |
| Control Type | Digital |
To Next Page
